User's Manual

GN-BR02G 2.4GHz Wireless Broadband Router
2
Side Panel
The side panel of the GN-BR02G Wireless Broadband Router contains all the
Router’s ports as well as the DC power port and initialization button.
Figure 1: Router’s Side Panel
Reset Button There are two ways to reset the Router's factory defaults.
Either press the Reset Button, for approximately five seconds,
or restore the defaults from the Management Tools>Router
Initialization screen in Router's Web-based Utility.
WAN The WAN port is where you will connect your broadband
Internet connection.
LAN1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to PCs on your
wired network and other Ethernet network devices.
Power The Power port is where you will connect the power adapter.
Auto MDI/MDIX LAN
Ports
Auto MDI/MDIX WAN Port for
connecting to DSL or Cable
modem
Factory Reset button
Receptor for
Power
Adapter