Manualshelf

User's Manual

ManualsBrandsGIGA-BYTE TECHNOLOGY ManualsComputers & AccessoriesWireless Broadband Router / Wireless Access Point
12345678910
Chapter 2 Installation
Hardware Requirements
To use the Wireless Access Point on your network, each computer may need
the following requirements:
An installed 802.11b/g wireless adapter.
An Ethernet LAN switch or hub.
A wired RJ-45 Ethernet cable
System Requirements
A Computer with Windows, Macintosh, or Linux-based operating system.
To run AP Manager, you need a computer with Windows operating
system.
Internet Configuration Requirements
In order to connect your Access Point to the AP Manager, you will need the
following configuration parameters to configure the TCP/IP setting of your
computer:
Static IP Address: 192.168.1. x (e.g, 2 ~ 253)
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.254