User's Manual

If you want to get IP address from the DHCP server automatically on your
network, you will select “Client Enabled”. Or you want to use the Access
Point as a DHCP server to automatically assign dynamic IP address on
the network, you will select “Server Enabled”.
 DHCP Client Range & DNS
If you select the “Server Enabled” setting, please input the IP address
range and the DNS for your network. The DNS information provied by
your ISP company.
 802.1d Spanning Tree
Enabled or Disabled the 802.1d Spanning Tree function. The default
setting is Disabled.
Verify the desired setting and then click the “Apply” button to set the value into
access point.