User's Manual Part 2

GN-B46B Wireless Broadband Router User Guide
43
Normal user please select “NAT enable” or “UPnP&NAT” then connect to the
Internet in general.
Verify the desired setting and then click the “Finish” button to set the value into GN-B46B.
And then the screen will transfer to WAN configuration setting page.
WAN Configuration Setting
There are four WAN configuration setting you may setup on WAN Configuration page.
From this page, you can select which WAN Configuration Setting you would like to use
now.
Verify the desired setting and then click the “Submit” button to set the value into GN-
B46B.