Manualshelf

User's Manual Part 2

ManualsBrandsGIGA-BYTE TECHNOLOGY ManualsComputers & AccessoriesWireless Broadband Router/Wireless Broadband AP
12345678910
50
GN-B46B Wireless Broadband Router User Guide
Static Routing Table
Under some of Internet environments, some of the subnet do not go through the default
gateway. Users can add those routing information to Static Routing Table themselves.
Verify the desired setting and then click the “Submit” button to set the value into GN-
B46B.
n Destination IP
The Destination IP address is the address of the network or host to which
the static route is assigned.
n Netmask
The Netmask determines which portion of a destination LAN IP address is
the network portion, and which portion is the host portion.
n Gateway
This is the IP address of the gateway device that allows for contact
between the router and the network or host.
n Metric
Type a numeber between 1 and 15 as the Metric value. This represents
the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set is to 1. The
default value is 1.