User's Manual

20
GN-A16B Wireless Access Point User Guide
IP Config Page
1 Obtain an IP address automatically
The IP Configure tab allows you to configure the IP parameters of the access point.
You can check this selection to get IP address from the DHCP server automatically
on your network.
.
1 Use the follow ing IP address
You can check this selection to assign IP address by yourself.
IP Address Use this option to assign an IP address to the access point. The
default IP address is 192.168.1.1. Please make sure the assigned
IP address is unique on your network.
Subnet Mask Specify the subnet mask of the access point. The default subnet
mask is 255.255.255.0.
Gateway Enter the IP address of the default route. The default gateway is
192.168.1.254
After you change the IP address of the AP, please also change the PC’s (AP Manager)
IP address to the same subnet. And then click the “Find Access Point” icon; AP
manager will search the AP on the network.