User's Manual

Method 2

If require to setup as many GN-AP101B at the same time. You can setup a

DHCP Server and let it assign IP to all the GN-AP101B so it has its own

unique IP address. After the setup is finished, and then remove or disabled

DHCP Server at last. Now, you can use the AP Manager to find all

GN-AP101B in your network, and then setup the N-AP101B as static IP

address one by one. Notice: After assign static IP address to every

GN-AP101B, be sure to set the PC (AP Manager) to the

same subnet.

Obtain IP Address Automatically - DHCP Server Enabled

If you are using a DHCP server in your network, you can connect a DHCP

server with the GN-AP101B and an

AP Manager through a switch/hub. The IP

address of the GN-AP101B should be configured to “Obtain an IP address

automatically” (which is default setting). The DHCP server will assign the IP

address to the GN-AP101B. The PC (AP Manager) should use the IP on the

same subnet as the GN-AP101B. Or, you can configure the PC (AP

Manager) to “Obtain an IP address automatically” and assign IP by the same

DHCP server.

Switch/Hub

DHCP Server

GN-AP101B

PC (AP Manager)

DHCP Server

……..

Switch/Hub

……..

PC (AP Manager)

Switch/Hub