User's Manual

GN-AP01G AirCruiser G Access Point

Hardware Installation

Follow the steps below when installing your Access Point(s).

Before you begin, please keep the following in mind when placing your Access Point(s).

9 Select a suitable location to install the Access Point. Assure that the location is away from

any interfering radio signals from devices such as microwave ovens, garage door openers,

vacuum cleaning devices, etc. Please also operate the Access Point in a cool dry place, away

from direct sunlight.

9 Position the Access Point appropriately. Signal strength is greatly dependent on your well

placed Access Point. Generally, a centralized area with 360° clear line of sight is the best

location with the antenna in a high position to allow optimal propagation of the signal. The

location of the Access Point greatly influences the signal reception.

Installing the Access Point

Step 1 Turn off all the hardware devices in your network.

Step 2 Connect the Ethernet cable of your router/hub to the LAN port of the Access Point.

Step 3 Plug the power adapter cord into the router’s power jack and then plug the power adapter into a

power outlet.

Step 4 Turn on all the hardware devices in your network. After verifying all the connections, proceed to

Appendix C: PC Configuration