User's Manual

GN-AP01G AirCruiser G Access Point

Advanced Page

To enhance the security of the wireless network, this AP provide the MAC address filtering mechanism to

prevent the unauthorized user access. Check “Enable MAC filter” and key in MAC address table, then only

those MAC address in the table are allowed to connect to this AP.

 Enable MAC Filter

Choose the “Enable MAC Filter” and click the “Add” button to add more MAC addresses or click

“Remove” button to delete the MAC addresses from the Authorized MAC Address table. Besides, you

can click “Edit” button to edit the MAC address.

 Disable MAC Filter

The default is “Disable MAC filter".

Verify the desired setting and then click the “Apply” button to set the value into access point.