User's Manual

GN-AP01G AirCruiser G Access Point

Hidden ESSID

This setting enables you to hide ESSID name, which is needed by clients in order to connect to the

Access Point. The default value is “Disable”. In this setting, all users are able to read your AP’s

SSID name.

RTS Threshold

This value should remain at its default setting of 2432.

ESSID

ESSID (or SSID as it is usually referred to) is the network name of the Access Point in the wireless

network. You should set the same SSID name for all your wireless-equipped devices to allow dynamic

clients to easily roam among them. The SSID name can be up to 32 characters in length and is case

sensitive (i.e. upper case letters “A~Z” and lower case “a~z” are unique).8

Verify the desired setting and then click the “Apply” button to set the value into Access Point.