User's Manual

GN-AP01G AirCruiser G Access Point
35
Wireless Operation
Normally, you can have the wireless work smoothly even if you didn’t change any items in this page.
Region
Because of the different region has a different open channel regulation, please check whether the
default region value is your local area. If it did not appear properly region please contact your local
distributor or authorized reseller immediately.
Channel ID
Please choose the channel for best performance. Normally, no change is needed. The default value is
channel 6.
Preamble Type
The preamble field shall be provided so that the receiver can perform the necessary operations for
synchronization.
Transmit Rates
Select the desired data rate. The range is from 1 to 54Mbps and the default rate is set to “Auto”.
Auto Rate
In this item you can select either “enable” or “disable”. The default value is “enable”.
Enable: If the selection is “enable”, the transmit rates will automatically change to the optimum rate
allowed. The range of auto-change will base on the setting of “Transmit Rate”.
Disable: There is no transfer rate auto-change. The transfer rate will be defined by the “Transmit Rate”
column.