User's Manual

GN-AP01G AirCruiser G Access Point
31
Tool bar
Find Access Point Connect To AP By IP
Save AP Configuration Load AP configuration
Page Copy Page Paste
System Reboot Load Default
- Find Access Point: Find all AP in the same subnet.
- Save AP Configuration: Save all setting of the AP to a temp file.
- Load AP Configuration: Load the setting of the temp file that you saved before to the current AP.
- Page Copy: Copy the setting of the current page.
- Page Paste: Paste the setting you have copied to the current page. (You can paste the setting of
AP1 to AP2 at the same tab page.)
- System Reboot: Reboot the Access Point.
- Load Default: Set the Access Point to the manufacture default.
- Connect To AP By IP: If you want to manage the AP in the different subnet, use this function and key
in the IP.