User's Manual

GN-AP01G AirCruiser G Access Point

Wireless Basic Settings

The Access Point will automatically detect and display your wireless settings. Changes of these settings will

influence your wireless connection and performance.

SSID

ESSID (or SSID as it is usually referred to) is the network name of the Access Point in the wireless

network. You should set the same SSID name for all your wireless-equipped devices to allow dynamic

clients to easily roam among them. The SSID name can be up to 32 characters in length and is case

sensitive (i.e. upper case letters “A~Z” and lower case “a~z” are unique).

Channel Number

Please choose the channel for best performance. Normally, no change is needed.

Transmit Rate

Select the desired data rate. The range is from 1 to 54Mbps and the default rate is set to “Auto”.

802.11g Only Mode

Enabled -- No Wireless-B clients will be allowed on the network.

Disabled – Both Wireless-G and Wireless-B clients will be allowed on the network. (Default setting)

Hidden ESSID

This setting enables you to hide ESSID name, which is needed by clients in order to connect to the

Access Point. The default value is “Disable”. In this setting, all users are able to read your AP’s

SSID name.

RF Radio