User's Manual Part 1

GN-A15AG Wireless Access Point User Guide
27
When WPA option is selected, the Radius/WPA page will appear as shown below.
WPA Algorithm, There are three settings you can select : “TKIP”, “AES”
and “Auto”.
RADIUS server IP, Please assign a IP address to the primary RADIUS server
(authentication server).
RADIUS Port, The setting range is 1~65536 and the default value is 1812.
RADIUS sercet, This filed can key in up to 256 character.
WPA Re-Key, Under this option two setting are possible: “enable” or
“disable”. The default value is “enable”.
Verify the desired setting and then click the “Apply” button to set the value into access
point.
WPA Re-Key Interval, Enter a Rekey Interval (normally the unit is seconds).