User's Manual Part 1

GN-A15AG Wireless Access Point User Guide
25
If the 802.1x – Dynamic WEP option is selected, the Radius/WPA page will appear
as shown below.
RADIUS server IP, Please assign a IP address to the primary RADIUS server
(authentication server).
RADIUS Port, The setting range is 1~65536 and the default value is 1812.
RADIUS sercet, This filed can key in up to 256 character.
RADIUS Re-Key, Under this option two setting are possible: “enable” or “disable”.
The default value is “enable”.
Verify the desired setting and then click the “Apply” button to set the value into access
point.
WPA if you have been using Wi-Fi for a while, you are probably familiar with the
802.1X authentication protocol. This protocol allows users to authenticate
into a wireless network by means of a RADIUS Server. In standard Wi-Fi,
802.1X authentication is optional. However, 802.1X authentication is a
requirement for WPA. If your environment does not have a RADIUS server
in place, you can still use WPA in spite of the 802.1X requirement. As an
alternative to RADIUS, WPA supports the use of a preshared key.