User's Manual Part 1

GN-A15AG Wireless Access Point User Guide

1 Auto Rate

In this item you can select either “enable” or “disable”. The default value is “enable”.

Enable If the selection is “enable”, the transfer rate will automatically change to

the optimum rate allowed. The range of auto-change will base on the

setting of “Transmit Rate”.

Disable There is no transfer rate auto-change. The transfer rate will be defined by

the “Transmit Rate” column.

1 Hidden ESSID

This setting allows you to hide the ESSID in wireless transmission. Those who don’t

know the ESSID will not be able connect to the AP. The default value is “disable”.

1 RTS Threshold

This value should remain at its default setting of 2346. Should you encounter

inconsistent data flow, only minor modifications are recommended. The setting range

is 0 ~ 2346.

1 ESSID

The ESSID or SSID is the name represent the AP in the wireless network. The ESSID

of all AP in your network should set to identical for the mobile client can roam

between access points. This ESSID string is case sensitive of up to 32 ASCII

characters.

Verify the desired setting and then click the “Apply” button to set the value into access

point.

Note: The Data Rate of the 802.11b standard are 11M, 5.5M, 2M, 1M.

The Data Rate of the 802.11g turbo and 802.11a turbo can up to 108Mbps.

The Data Rate of the 802.11a standard are 6M, 9M, 12M, 18M, 24M, 36M, 48M,

54M

Transmit Rate setting:

54M : range is among 6M, 9M, 12M, 18M, 24M, 36M, 48M and 54M

48M : range is among 6M, 9M, 12M, 18M, 24M, 36M and 48M

36M : range is among 6M, 9M, 12M, 18M, 24M and 36M

24M : range is among 6M, 9M, 12M, 18M and 24M

18M : range is among 6M, 9M, 12M and 18M

12M : range is among 6M, 9M and 12M

9M : range is between 6M and 9M

6M : no auto-change. The transmit rate is fixed at 6M.