User's Manual Part 1

GN-A15AG Wireless Access Point User Guide

Wireless Operation Page

Normally, you can have the wireless works smoothly even you didn’t change any item in

this page.

1 Region

Because of the different region has a different open channel regulation, please check

whether the default region value is your local area. If it did not appear properly region

please contact your local distributor or authorized reseller immediately.

1 Channel ID

Please choose the channel, which you can get best performance. Normally, it doesn’t

need to change. The default setting is the “Auto Select” channel.

1 Preamble Type

The preamble field shall be provided so that the receiver can perform the necessary

operations for synchronization. Under this option two setting are possible: “Long” or

“Short”. The default value is “Long”.

1 Transmit Rate

You can select one of the rates among 1M, 2M, 5.5M, 11M, 6M, 9M, 12M, 18M, 24M,

36M, 48M, 54M based on your need. If the “Auto Rate” option is enable, it will not be

able to perform the “Transmit Rate” function.