User's Manual Part 2

Appendix- 77 -

English

Create RAID Volume

Press Enter under Create RAID Volume to set up RAID.

Intel(R) Application Accelerator RAID Option ROM v4.0.6180

[ CREATE VOLUME MENU ]

[ HELP ]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and

can not contain special characters.

[KL]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

Name : RAID_Volume0

RAID Level : RAID0(Stripe)

Disks : Select Disks

Strip Size : 128KB

Capacity : 223.5 GB

Create Volume

After entering the Create Volume Menu, you can set disk name with 1~16 letters (letters cannot be special

characters) under Name item.

After setting disk name, press Enter to select RAID Level.

Intel(R) Application Accelerator RAID Option ROM v4.0.6180

[ CREATE VOLUME MENU ]

[ HELP ]

Choose the RAID level best suited to your usage model.

RAID0(Stripe)- Creates a volume where equal portions of the volume

are spread across all the disks. This creates a volume

with higher performance by accessing all disks at once.

RAID1(Stripe)- Creates a volume where a redundant copy of the data is

stored on each disk. This creates a volume protected

from a single hard disk failure.