User's Manual Part 2

Hardware Installation- 32 -

English

19) IR

Be careful with the polarity of the IR connector while you connect the IR. Please contact your

nearest dealer for optional IR device.

Pin No. Definition

1VCC

2No Pin

3 IR RX

4GND

5IR TX

20) CLR_CMOS (Clear CMOS)

You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily

short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.

Open: Normal

Short: Clear CMOS