User's Manual



ProductGuide



HardwareRequirements



ForUSBinputdevice:PCwithbuilt‐inUSB

For3.5mmaudioproduct:Devicewith3.5mmaudiojack



HardwareInstallation



1. Forwirelessmodels,pleaseinsertbatteriesproperlyandmakesurethepowerswitchison.

2. Connectthedeviceorreceivertoyourcomputer.

3. Waittillthesystemautomaticallydetectthedevice.

4. Thedeviceisnowreadytowork.

Warning:Awrongbatteryplacementmaycausebatteriesoverheat



HealthWarning



KeyboardandMouse

Longperiodofrepetitivemotionusinganimproperlyset‐upworkplace,orincorrectbodyposturemaybeassociated

withphysicaldiscomfortandinjurytoner ves,tendons,andmuscles.

HeadsetDevice

Extendedexposuretohighvolumeswhenusingaheadsetmayresultintemporaryorpermanenthearingloss.

LaserProducts

Pleasedonotdirectlylookintothelaserbeam.

Donotshinealaserpointeratanyoneoramirror‐likesurface(areflectedbeamcanactlikeadirectbeamoneye).



Maintenance



1. Should you have trouble operating the device properly, please contact GIGABYTE customer service center on

www.gigabyte.comforsupport.Donotattempttoserviceorfixthedeviceyourselfatanytime.

2. Donottakethedeviceapart(doingsowillalsovoidyourwarranty).

3. Keep the product away from liquid, humidity  or moisture. Operate your device only within the specified

temperaturerangeof0°C(32°F)to40°C(104°F).Shouldyouoperateitinatemperaturethatisbeyondthisrange,



unplugandswitchoffthedeviceinordertoletthetemperaturestabilizewithintheoptimaltemperaturerange.



BatteryUseReminders



1. Keepallbatteries(usedornew)outofthereachofchildren.

2. Removethebatteriesiftheyarewornoutorbeforestoringyourdeviceforanextendedperiodoftime.

PAGE 1
Product Guide Hardware Requirements For USB input device: PC with built‐in USB For 3.5mm audio product: Device with 3.5mm audio jack Hardware Installation 1. For wireless models, please insert batteries properly and make sure the power switch is on. 2. Connect the device or receiver to your computer. 3. Wait till the system automatically detect the device. 4. The device is now ready to work.
PAGE 2
3. Do not heat, open, puncture, mutilate, or dispose of batteries in fire. 4. Do not mix new and old batteries or batteries of different types (e.g. carbon‐zinc, alkaline, and etc). 5. Always remove old, weak, or worn‐out batteries promptly and recycle or dispose them in accordance with Local and National Disposal Regulations. Rechargeable battery notice: 1. Risk of explosion if charging with the non‐rechargeable batteries. 2.
PAGE 3
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Canada, Industry Canada (IC) Notices “This device complies with Industry Canada license‐exempt RSS standard(s).