User's Manual

 TechnicalSpecifications
DriverUnits:40mm
Impedance:16ohm
FrequencyResponse:20Hz‐20KHz
Sensibility:121dB+/‐3dB
BluetoothVersion:3.0
Weight:248g

GettingStarted
 Charging
IftheBluetoothpowerLEDlightflashesinred,pleasechargetheheadset.
ChargetheheadsetviathesuppliedMicroUSBcable.Whilecharging,headset
operationisnotsuggested.Whentheheadsetisfullycharged,thebatteryLEDlight
willvanish.

 BeforeSwitchingOn
EnableBluetoothonyouraudiodevice.

 SwitchOnandOff
PresstheBluetoothpowerbuttonfor5secondstoswitchon.
PresstheBluetoothpowerbuttonagainfor5secondstoswitchoff.

 BluetoothConnection 
TheheadsetwillautomaticallybeavailableforBluetoothconnectionafterswitching
on.
Performthefirstconnection,theheadsetLEDlightwillflashinredandblue
(Bluetoothpairingmode).Performnewdevicesearchonyouraudiodevice.Select
“ForceH1”Passcode:0000.Ifconnected,theLEDlightwillbeinsolidblue.
Oncethedevicehadbeenpairedwiththeheadset,theheadsetwillautomatically
connecttothedevicewhenturningonBluetoothfunction(Bluetoothlink‐back
mode).
Iftheheadsetisturnedonbutnotconnected,itwillbeinStandbymode.Press
“Musicplay/pause”buttontoBluetoothlink‐backmodeorpress“Powerbutton”to
Bluetoothpairingmode.
PleasenotethatBluetoothconnectionrangeis10meters.


