User's Manual

40
4
Settings
Chapter 4 Settings
4.1 Personal settings
You may set your personalized settings by preference.
Buttons
You may assign programs to a hardware button.
You may set certain keys as the activation keys for your
most commonly used programs.
1. Tap
Start > Settings > Personal tab > Buttons >
Program Buttons tab.
● Under
Select a button, tap the button you want
to assign to a program, and then select a program
from Assign a program.
2. On
Up/Down Control tab, Delay before first repeat
changes the time elapsed before scrolling begins.
Repeat rate changes the time it takes to scroll from
one item to the next.
Input
Set your preferred input method.
1. Tap
Start > Settings > Personal tab > Input.
2. On
Input Method tab, select a desired input method.
On Word Co mple t i o n tab, se lec t the de si r ed
settings for word completion. On Options tab, select
the desired options for writing and recording. These
options apply to any program on your MWg Atom V
where you can record or write. You can also change
input options by tapping the arrow and Options.
Lock
You may set a personal password to lock your MWg
Atom V.
A strong password must have at least 7 characters that
are a combination of uppercase and lower case letters,
numerals, and punctuation.
1. Tap
Start > Settings > Personal tab > Lock.
2. To enable this function, select how long your MWg
Atom V must be turned off before the password is
required for using your MWg Atom V by tapping
Prompt if device unused for.
3. Select the type of password you would like to use:
Strong alphanumeric or Simple PIN.
4. Enter the password and,
● If your MWg Atom V is congured to connect to a
network, use a strong password to help protect
network security.
● If you forget your password, you must hard reset
before you can access your MWg Atom V. A hard
reset will erase all les and data you have created
and any programs you have installed.
● If you have used
ActiveSync to create a backup
le, all of your program data can be restored.