Use Manual

AC I NP UT
～110 V/ 60 Hz
PO WE R
LE D PO WE R
LE D OU TP UT
AN T
AU DI O IN PU T
OU TP UT 4( Ω)
ON
OF F
ON
OF F
LR
Panel function description:
Stage SpeakerStage Speaker
Use Manual Use Manual
<1-1 > <1 -2 >
1.Microphone Priority Switch
. adjustment2 Mic ECHO
3.USB/SD/MMCJack
4.Five-paragraph EQ
15.LED Display
16.Audio output
17.LED power out
18.Vice-boxpowerout
19.TUNER Antenna
20.AC~220V/50Hz Powerinput
21.LEDswitch
22.Power switch
5.Microphone in
6.Bass adjustment
7.Treble adjustment
8.Main volume adjustment
9.MIC volume
10-14.Function keys
Stage SpeakerStage Speaker
Use Manual Use Manual
110V/60Hz
Amplifier output connection
Light power output connection
Connect the lights to the auxiliary box with the RCA line.
Connect to secondary box with 6.35 audio interpolation.
Connect AC power, then turn on the light switch and power switch to play music.
Load the microphone battery with a 5 # X2 battery, open the microphone,
and then adjust the microphone volume and reverberation size for karaoke singing.
1 2 3 4 5 6 7
89
10 11 12 13 14 15
MODE
REPEAT
SD
Mobile phone
210X285m m纸张，两面印刷，要求油墨不能印透过面
Domino (W-263A)对箱说明书
Switchbetweensinglerepeatorlistrepeat
AC I NP UT
～110 V/ 60 Hz
PO WE R
LE D PO WE R
LE D OU TP UT
AN T
AU DI O IN PU T
OU TP UT 4( Ω)
ON
OF F
ON
OF F
LR
16
17
18
22
19
20
21
TO:AC110V/60Hz
Do not put the product in hot surfaces, prevent from soaking and wet areas.
Do not open back board, this may void your warranty. Risk of electric shock.
For maintenance or repairs should only be done by professionals.
In case of water spills or rain disconnect immediately.
Turn power off and disconnect the unit when the system is not in use.
Turn the master volume to minimum position when turning on the unit.
Adjust the equalizer to desired sound. turn clockwise to increase volume.
Reposition all knobs to minimum position before turning the system off.
Donottouch
DOMINO
DOMINO
Donottouch
Bluetooth wireless operation:
Turn on the speaker, and press the MODE key to switch to Bluetooth MODE, at the same time
the speaker emits its Bluetooth pairing name Domino. Turn on your phone or other Bluetooth
receiver, and find Domino in the Bluetooth directory, click it to connect.
After connecting successfully, there will be audible indication. Playing songs from the Bluetooth
device or other audio can be transmitted to the speaker via Bluetooth.