Owners manual

GP316

CHROME HEADER

DODGE RAM TRUCK 4.7L 2/4WD

DODGE DAKOTA TRUCK 4.7L 2/4WD

GIBSON HEADERS ARE 50 STATE SMOG LEGAL

Thank you very much for purchasing our Gibson header

for your vehicle.

If you need further assistance, please do not hesitate to call our

Technical Department at (800) 528-3044

Monday through Friday

8:00 a.m. to 5:00 p.m. PST.

1270 WEBB CIRCLE CORONA, CA 92879

PAGE 1
GP316 CHROME HEADER DODGE RAM TRUCK 4.7L 2/4WD DODGE DAKOTA TRUCK 4.7L 2/4WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL Thank you very much for purchasing our Gibson header for your vehicle. If you need further assistance, please do not hesitate to call our Technical Department at (800) 528-3044 Monday through Friday 8:00 a.m. to 5:00 p.m. PST.
PAGE 2
INSTALLATION INSTRUCTIONS GP316 SHORTY HEADERS NOTE: Installation of these headers requires an adequate workspace, general mechanic's tools general mechanical "know how”. You should carefully read these instructions before attempting to install these headers. This part is legal on Emission Controlled Vehicles. 1. Place vehicle in a location where the floor is solid and flat, with adequate lighting. Do not attempt to work on a hot engine. Heat causes metal to expand and makes removal of fasteners difficult.
PAGE 3
8. Using a scraper, remove all carbon deposits on head surface. At this time apply a high temperature sealer (O2 sensor safe) to exhaust pipe flare in order to avoid problems due to lack of space later on in the installation. 9. Installing passenger side header through the top. Using new head gasket + bolts. Use a high temp gasket sealer (O2 sensor safe) on head gasket. NOTE: Last top bolt use 3/8” or 1/4” extension & socket to install hardware for easier installation.
PAGE 4
PAGE 5