Owners manual

6) RE-INSTALL THE SPARK PLUG WIRES, DIP STICK TUBE, AND RECONNECT THE STEERING SHAFT ON THE
ALIGNMENT MARK.
7) ON THE PASSENGER SIDE REMOVE SPARK PLUG WIRES AND SPARK PLUGS AND SET ASIDE.
8) REMOVE THE FIVE BOLTS ATTACHING THE MANIFOLD TO THE HEAD. REMOVE THE MANIFOLD FROM THE
TOP OF THE VEHICLE.CLEAN THE SURFACE OF THE HEAD. REMOVE ANY CARBON DEPOSITS THAT MAY BE ON
THE HEAD.PREPARE THE SUPPLIED HEADER BOLTS WITH ANTI-SEIZE TO THE THREADS.
9) INSTALL THE NEW HEADER USING THE SUPPLIED HEAD GASKETS AND BOLTS. TIGHTEN THE GIBSON
HEADERS FROM THE MIDDLE BOLTS TO THE OUTSIDE BOLTS. Torque all fasteners to factory specifications.