Owners manual

7. On suburbans there is an extra set of coolant lines passing by the headers on the
passenger side. Take care to keep the coolant lines away from the headers so there is
no contact with the tubes.
8. Recheck everything, reinstall air box.
9. Start the engine. Let it warm up. Check for leaks. Shut engine off. Recheck all
Bolts and nuts.
10. Re-check all bolts and nuts after the first 200 miles.
11. Periodically check and re-tighten all bolts and nuts.
NOTE: IT IS NOT UNUSUAL WHEN INSTALLING HEADERS TO
GET A BURNING SMELL. THIS IS NORMAL AND IT WILL GO
AWAY!
Parts List
Qty Description
(1) Driver’s Side SS Header Assembly
(1) Passenger’s Side SS Header Assembly
(16) Bolts header #3529 8MM BOLTS
(16) Star washers header
(2) Header gaskets
(1) Bolt kit # BO-1013
(1) Air Gasket
YOU MUST RE-TORQUE YOUR HEADER BOLTS
AFTER APPROX. 100-200 MILES. IF NOT DONE
THE GASKETS COULD BECOME LOOSE.