Owners manual

What DOES work is this:
Go over the bolts again after the first DAY of driving (or about 100 miles- whichever
comes first), then after the first WEEK, after the first MONTH, and then EVERY 6
MONTHS. Our exclusive gaskets are specially made so that the cylinder head
SHOULD begin to melt before the gaskets can burn up. About the only way to kill these
gaskets is to let the headers get loose and then keep driving with a leak. Due to varying
conditions between geographical locations and usage, we strongly recommend having
the engine re-tune at a reputable tune-up shop after the installation of the headers.
Doing so will ensure that you get the maximum benefit from the installation of the
headers.
GIBSON PERFORMANCE strives to deliver the highest quality materials, workmanship,
and service. Please so not hesitate to call our technical line if you have a question or
experience a problem.
When these instructions are followed precisely, you will find the installation of your
exhaust system to be relatively simple. We cannot over emphasize the importance of
adhering strictly to this proven approach, as it will virtually eliminate any difficulties,
which you might otherwise encounter.
Due to restricted room in the engine compartment, your headers may come close to
certain body and chassis components. This is a normal condition for an installation of
this type.
WARNING: Make certain you have enough clearance around brake, fuel, and electrical
lines, etc. In some cases, it may be necessary to relocate items which might be
adversely affected by exhaust heat.
WARNING: Installation of any type of "wrapping" material onto the headers will destroy
the heat dissipation properties of the tubing, causing premature deterioration of the
metal and subsequent failure. Use of any "wrapping" material will void the warranty.
LEGAL STATUS: Installation of headers on vehicles with catalytic converters and/ or
other emission control equipment must be accomplished in accordance with all
government regulations pertaining to such emissions standards. These headers are
smog legal.