Owners manual

DUE TO RESTRICTED ROOM IN THE ENGINE COMPARTMENT, YOUR HEADERS MAY
COME CLOSE TO CERTAIN BODY AND CHASSIS COMPONENTS. THIS IS A NORMAL
CONDITION FOR AN INSTALLATION OF THIS TYPE. MAKE CERTAIN YOU HAVE
ENOUGH CLEARANCE AROUND BRAKE, FUEL, AND ELECTRICAL LINES, ETC. IN SOME
CASES, IT MAY BE NECESSARY TO RELOCATE ITEMS WHICH MIGHT BE ADVERSELY
AFFECTED BY EXHAUST HEAT.
WARNING: INSTALLATION OF ANY TYPE OF “WRAPPING” MATERIAL ONTO THE
HEADERS WILL DESTROY THE HEAT DISSISPATION PROPERTIES OF THE TUBING,
CAUSING PREMATURE DETERIORATION OF THE METAL AND SUBSEQUENT FAILURE.
USE OF ANY “WRAPPING” WILL VOID THE WARRANTY.
LEGAL STATUS: INSTALLATION OF HEADERS ON VEHICLES WITH CATALYTIC
CONVERTERS AND/ OR OTHER EMISSION CONTROL EQUIPMENT MUST BE
ACCOMPLISHED IN ACCORDANCE WITH ALL GOVERNMENT REGULATIONS
PERTAINING TO SUCH EMISSIONS STANDARDS. THESE HEADERS ARE SMOG LEGAL.
E.O. STICKER INFORMATION
PLACE THE STICKER IN AN AREA THAT IS PROTECTEDF ROM HIGH WEAR OR
FREQUENT EXPOSURE TO DIRT, WATER, ETC. MAKE SURE THE AREA IS CLEAN
BEFORE APPLYING. E.O. ARE USUALLY UPDATED ANNUALLY, YOUR E.O. STICKER
DOES NOT NEED TO BE REPLACED TO REFLECT CHANGES THAT ARE MADE. SMOG
INSPECTION STATIONS ARE UPDATED REGULARLY.