Specification

SPECIFICATIONS
SILICONE SEALANT
1 oz. TUBE • ONE COMPONENT SILICONE RUBBER COMPOUND
#SEAMER1OZ
Precautionary Statements - Avoid breathing dust/fume/gas/mist/vapors/spray
Use only outdoors or in a well-ventilated area
Wash face, hands and any exposed skin thoroughly after handling
Wear protective gloves/protective clothing/eye protection/face protection
Weather Guard Rainware Silicone Gutter Sealant has excellent resistance to weathering, vibration, moisture, ozone and
extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteris-
tics. When fully cured it can be used for extended periods at temperatures up to 400° F (204° C)
Directions
1. Clean and dry all surfaces
2. Take o cap and remove foil seal
3. Squeeeze tube to apply sealant liberally to seams. Remove excess with a clean, dry cloth or paper towel.
Note: If tooling is required, do so within 10 minutes. Remove excess with a clean, dry cloth or paper towel.
Application Temperature: 0° F (-17° C) to +140° F (60° C)
Cure Time: 24 hours (Relative Humidity 50%) Optimum strength is achieved in 7 days. Higher Humidity accelerates cure.
Storage: When stored unopened, at or below 90° F (32° C), it has an expected shelf life of 12 months from date of shipment.
Caution: In case of contact with eyes, rinse thoroughly for 15 minutes, seek immediate medical attention. Contact with
skin may also cause irritation, remove the sealant and rinse with water. Contact physician if needed. Acetic Acid released
during application and cure, overexposure may irritate eyes, skin and nose. Proper ventilation is required.