Instructions / Assembly

X 8
2
3 4
8"
8"
1
Remove old vents. It may be necessary to “square up”
the hole to 8" x 8" maximum.
Fasten with eight 1 1/2" long roofing nails using the
pre-punched holes provided.
Nails must be installed in all 8 pre-punched locations.
Place the Kwik-Plug™ repair product centered in the
vent hole opening.
Use Kwik-Plug™ to repair any roof deck damage under 8 inches square.
The Repair that Restores Roof Integrity
RESTORE ROOF INTEGRITY
™
KWIK-PLUG ROOF REPAIR
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.