Instructions / Assembly
These basic installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to check
with your local building inspector or building permit oce for approvals and possible variations that may apply.
1. Set foundation forms
2. Slide block vent into form to the desired depth.
3. Fasten block vent to form using 4 fasteners on each side.
4. Pour concrete as usual. After the concrete has dried,
remove the forms.
1
2
3
4
P.I.P. FOUNDATION VENT
INSTALLATION GUIDELINES
#559029
P.I.P. = Pour in Place
www.gibraltarbuildingproducts.com