K10C TV BOX User Manual
‐‐‐‐‐‐Welcome to use K10C ‐‐‐‐‐‐ • Before using this machine, please carefully read the instruction to ensure you use it safely and correctly. • The instruction in user manual is based on the preset information of machine. • All the images and screen shot pictures in user manual may be different from the real appearance of products. • Usable functions and supplementary services are changeable for the decices, software and services providers.
Specifications OS Android 7.1.2 CPU RK3229 32bits Quad Core 1.46Ghz(Cortex‐A7) GPU Mali‐400MP2 DDR 1GB/2GB / eMMC 8GB/16GB ExpandMicroSD T‐Flash(Maximum support 32GB) Video Format MPEG‐1, MPEG‐2, MPEG‐4,H.263, H.264, H.
WiFi Bluetooth P t Ports Accessory HTML5 802.11 b/g/n Ver 2.0 HDMI 2.0, Micro SD X1, USB 2.0 x 1 ,USB 2.0 x1, RJ45X1 ,Audio outx1 , DC IN(5V 2A) HDMI cable, Remote control, power adapter, manual Supports flash 11.x or later.
The explanation of ports IR LED
DC DC 5Vin output USB 2.0 Recovery HDMI TF Card USB 2.
The instruction of remote controller Indicator off/ standby Menu Navigation upward Navigation on the left Navigation on the right Navigation downward Back voice ‐ Main menu voice +
Basic Spare parts lists K10C wholeset X1 PCS WIFI Antenna X1 PCS 5V‐2A DC Power Supply X1PCS HD HDMI cable X1PCS User manual X1PCS
Solutions to commen questions 1.The device is without displaying? Solution: check whether to use a special power supply, equipment LOGO red light indicates that the power is normal. 2 No display on TV? 2.No Solution: make sure HD cable is connected properly, and replace new HD line and different monitor. 3.Infrared nonfunctioning? Solution: ensure that the remote control power supply has enough power, when pressing the remote control, the remote control indicator light is red.
operating environment : Product operating voltage: DC5.0‐‐5.4V. operating ambient temperature: ‐20‐‐‐+45℃. Operating steps： 1.Connect the power adapter and HDMI cable in the product package to the product interface.
2. After power on, the product will start up automatically and start flashing blue LED light. The product is starting up.
3 . After the product enters the desktop, the blue LED will turn into a normally bright state, and now you can use the USB mouse, IR Remote Control and others to control the product.
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
