Triplex Ceramic Plunger Pump Manual Model GP7155-5100 Contents: Installation Instructions: Preventive Maintenance and Spare Parts List: Pump Specifications: Exploded View: Parts List/Kits: Repair Instructions: Dimensions: Warranty Information: page 2 page2 page 3 page 4 page 5 page 6 page 7 back page
INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance. further reduce system pulsation. Dampeners can also reduce the severity of pressure spikes that occur in systems using a shut-off gun.
Specifications - Model GP7155-5100 U.S. ........................................... Metric Volume .............................................................................. 65.8 GPM .................................. 250 LPM Discharge Pressure ........................................................... 1500 PSI .................................... 100 Bar Crankshaft Speed ..................................................................................................................
Exploded View - GP7155-5100 4
Spare Parts List - GP7155-5100 ITEM 1 2 4 5 8 9 10 11 12 13 14 15 16 20 20A 21 22 23 24 25 28 30 30A 30B 30C 30D 31 32 32A 33 33A 33B 33C 34 36 36A 36B 36C 36D 38 38A 38B 39 PART 07600 13000 07601 07602 07603 01009 13133 07109-0400 07109 07182 07607 07608 07184 07610 07611 07612 13405 07614 13182 13183-0100 13184 07619 07225-0100 13136 08280 13154 07623 07624 07625 06950 07627 06951 07249 13137 07706-0100 07667-0100 07666 07664-0100 07755-0100 13155-0100 13156 07721 13157-0100 DESCRIPTION Crankcase Oil Fi
GP7155-5100 REPAIR INSTRUCTIONS 57 58 51C 56 51E 51A 57 51 51D To Check Valve Assemblies 1. Loosen plugs (58), take out tension spring (57) and then remove the complete valve assembly (51) with either a valve tool or an M16 hexagon screw. 2. Remove valve adapter (56) and tension spring (57) with pull-out tool size 5. There is an O-ring (51G) under both the suction and the discharge valve each of which can be removed with a bent piece of wire.
GP7150A, GP7155A, GP7255A SERIES DIMENSIONS - INCHES (mm) GP7155-5100 Pump Dimensions - Inches (mm) 7
GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and self-service car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace them free of charge.
