User Manual

31
 If the access point has a network key, the icon will be displayed.
8. On the SSID Name line for the network you want to connect to, tap
Connect.
 If the access point has a network key, the user will be prompted by a
pop-up screen to input the network key.
Note: If the AP Network Key Mode is WEP, a pop-up menu will appear after
tapping the Connect button. User must select the shared key or open
key and key 1.2.3.4. Tap
to confirm.
9. Tap
button to bring up the Keyboard and type in the network key.
10. Tap
to confirm.
11. A “Connecting…” dialog box appears.
12.
A
fter successfully connecting to the access point, you should see a green
checkmark icon next to AP SSID name.
13. If connection fails, a pop up message “Network Connection Failed” will
appear. Tap OK and try connecting to the access point again.
WEP Security Setting box
Network Key Input box
Wi-Fi Network Search screen
Notes:
1) If the connection is failed, the Status bar displays “Not Connected”
2) When the Status is showing “Connecting”, the device has just finished the association with AP and is trying to make connection. Please be patient
until it shows “Connected”.
3) Tap the
button to view the network details, including IP Address, Subnet Mask, Default Gateway and DNS Server.