User Manual

28
Setup Wi-Fi Network - Access Point’s DHCP settings is ON but the AP SSID is hidden and no encryption
key is needed
Note: 1) Follow these steps ONLY if your AP SSID name is hidden. If you are using a Wi-Fi network other than your own, then you must consult the Network
Administrator for that network to get access (i.e. network key).
2) Since your AP SSID is hidden, you can’t see your AP in Wi-Fi Network Search Screen. After you input your AP details in Manual Edit Wi-Fi Network
Screen, your AP can be shown in Wi-Fi Network Search Screen.
1. On the Setting screen, tap the
button. The Network screen
appears.
2. On the WiFi line, tap the On button to turn on WiFi.
3. On the Manual Edit Wi-Fi Network line, tap
button. The Network >
Edit screen appears.
4. Tap
to open the Keyboard screen. Type in your Wi-Fi AP SSID name
and then tap OK to save.
5. On the Network Key Mode line tap the
button. A pop-up list will
appear. Tap on the network key mode you want. Available modes are:
 No
 WEP
 WPA
 WPA2
6. On the Authentication Type line tap the button. A pop-up list will
appear. Tap the authentication type you want. If Network Key Mode is
WPA or WPA2, the Authentication Type and Transmit Key can not be
selected.
7. On the Network Key line tap
to open the Keyboard screen. Type in
your network key and then tap OK to save.
8. On the Save line tap Yes to save or tap No to cancel. You will be returned
to the Network screen.
Network screen
Network Edit screen