User Manual

20
12. To set the alarm tone, tap the button on the Alarm Tone line.
13. A pop-up will appear. Select which tone you want from a list of 5 alarm
tones.
14. Back on the Alarm Settings >Edit screen, tap Yes to save your alarm
settings or No to cancel settings. You will then be returned to the
A
larm
Settings screen.
15. To exit the Alarm Settings screen, tap the
button.
16. To exit the Clock, tap the clock’s face and then tap the
button.
To change an alarm
1. Tap the ON/OFF button to select turn ON/OFF the alarm.
2. To change an alarm’s settings, tap the
button on the alarm line you
want to change. Repeat the above step to change the alarm settings.
3. To exit the Alarm Settings screen, tap the
button.
4. To exit the Clock, tap the clock’s face and then tap the
button.
Alarm Settings > Edit > Alarm Time screen
Alarm Settings
Alarm Control
1. When the alarm time is reached, the selected alarm tone will be heard. At
the same time, the Alarm Control buttons are shown.
 Snooze button – Tap this button to snooze the alarm. The alarm tone
will stop and then turn on again after 5 minutes.
 Stop button – tap this button to turn the alarm off.
2. If you don't tap any control button, it will beep the alarm tone for 5
minutes and then stop. After 5 minutes, it will beep again. The alarm will
repeat this sequence for 40 minutes. Afterwards, it will turn off
automatically.
Clock with Alarm Controls