User Manual

Safety Precautions
Make sure to follow the directions below to prevent personal injury, accidents and damage to the product.
Warning:
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following precautions:
h Make sure to insert the power plug until it is firmly in place.
h Do not use a damaged power plug, power cord, or plug into a damaged outlet.
h Do not use force to pull the power cord.
h Do not touch the power plug with wet hands.
h Do not connect more than one appliance to a single outlet.
h Do not place anything heavy on the power cord.
h Make sure to turn the power off and disconnect the power plug from the outlet before moving the product.
h Make sure to disconnect any connected cables from other devices as well.
Caution:
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
h Hold and pull out the plug by its body when disconnecting it from the outlet, as pulling the plug out by the cord may cause it to be damaged. Failing to do
so, may cause fire, or the product may not turn on normally.
h Ensure that the power plug is disconnected before cleaning the product. Failing to do so, may cause electric shock or fire.
h Do not let water come into contact with or enter the power adapter, as this may cause electric shock or fire.
h Do not use the product outdoors in snowy or rainy weather, or near any water.
h When cleaning the floor with water, avoid any water contact with the power adapter.
h Do not place the power adapter near a heater, as this may cause fire.
Installation
Warning:
Failure to follow the accompanying directions may lead to serious injury or death.
Caution:
Plug the adapter to the socket outlet that near the equipment and shall be easily accessible. Use only the E-TEK (Output: 5.0V / 3.0A,
Input: AC 100 -240V ~ 50 / 60 Hz 0.8A) power supply that came with this unit. Using other power supplies may damage the unit.