User Manual

7
Turning your Frame on
If it’s your first time turning on your frame, or you have reset the frame to factory presets, then you must calibrate the frame, select your language and accept
the End User License Agreement (EULA).
Standing the Frame up
Rotate the frame handle to the desired viewing angle. To release the handle, press on both ends at the same time to release the locking mechanism.
Calibrate the Touch Screen
1. Slide the OFF / ON switch to ON.
2. There are five (5) points (+) needed to tap to calibrate the touch screen. The first point (+) is in the center of the screen and there is one (1) point (+) in each
corner. Follow the on screen instructions to calibrate the frame.
3. After completing the calibration, the Language screen will appear.
Language Selection
1. On the Language screen, tap on the language you want.
2. Next, tap OK to accept the selected language.
Language pop-up menu