User's Guide

28
♦Device status: indicates that the device is operating properly or that there is a
problem/conflict.
♦Device Address: the Bluetooth Device Address (BDA or BD_Addr) programmed into this
device when it was manufactured.
♦HCI Version: the version number of the Bluetooth Specification that the Host Controller
Interface complies with.
♦HCI Revision: the revision number of the Bluetooth Specification that the Host Controller
Interface complies with.
♦LMP Version: the version number of the Bluetooth Specification that the Link Manager
Protocol complies with.
♦LMP Sub Version: the sub-version number of the Bluetooth Specification that the Link
Manager Protocol complies with.
• The Advanced button: displays the Advanced Settings dialog box, which allows you to select
the country code and transmission power settings. This option is not available on all systems.
5.4.1 Hardware Advanced Settings Dialog Box
When available, this dialog box is reached from the Hardware tab of the Bluetooth Configuration
Panel.
Depending on the country in which the hardware is sold and/or in which it will be used, the
Advanced button may not be present.
From this dialog box you can set the:
• Country Code:
♦North America, Europe (except France), and Japan
♦France and China
• Maximum Transmission Power:
♦High
♦Medium
♦Low.
Click the Apply button to implement the changes. A dialog box appears with notification that the
Bluetooth device attached to this computer must be reset before the change(s) will take effect.
Click the Yes button to reset the Bluetooth device now—all open Bluetooth connections will be
closed.
Click the No button to save the changes—the changes will be applied the next time the Bluetooth
device is reset or restarted.