User's Manual

Eliminator Code is set to , the radio checks for activity only on channels using codes
and ignores channels using code .
Group Scanning
In Group scanning mode, the radio only scan among the channels enabled in the group and the
current channel.
To add a channel into the group
1. Press MENU key until the current channel number and a ‘-’ displays in LCD;
or
to change the ‘-’ into ‘y’; 2. Press
3. Press PTT to save the code setting or MENU to continue set up.
To enable Group Scanning:
1. Press MENU key until a ‘-’ and ‘GP’ (Stands for ‘group’) displays in LCD;
2. Press
or to change the ‘-’ into ‘y’;
3. Press PTT to save the code setting or MENU to continue set up.
Group Scanning operates the same as Normal Scanning.
13