User's Manual

CALLER ID OPERATION
All incoming calls with valid caller
ID records number are stored in a
call log. A maximum of 40 caller
ID records can be stored. The call
log Memory is stored on the base,
so all the handsets share the same
call log.
Receiving a Call
After the first ring, the caller's
name and telephone number will be
shown on the display. The New
Call icon will display until you
review all of your new calls.
Receiving Call Waiting
Caller ID
When you are on an existing phone
call, your GH4000 will display
incoming call waiting Caller ID
information of the second caller.
1.You will hear a beep and the
telephone will be muted
momentarily while the display
shows the Caller ID information.
2.When you press the "FLASH"
button to access the call, the
display will show "12" and the call
waiting Caller ID information.
IMPORTANT:
You must subscribe to Call Waiting
and Call Waiting Caller ID service
from your local telephone company
in order to receive Call Waiting
Caller ID information.
Reviewing New Call
Records
1.When the Time/Date screen is
displayed, pressing the "UP"
or"DOWN" button will display the
information from the last new call
received.
2.Continue pressing "UP" or
"DOWN" button to review all new
call records.
Reviewing All Call
Records
1.After you have reviewed all of
the new calls, press the "UP"
button. The LCD display will show
the newest call received.
2.Continue to press "UP" button to
display all records in the order they
were received from the oldest to
the newest, or press "DOWN"
button to review from the newest to
the oldest.
Caller ID Redial
1.Press "UP" or "DOWN" button to
select the Caller ID number that
you want to dial.
2.Press REDIAL once for 7 digits
plus a 1, 2 times for only 7 digits, 3
times to add a 1 and area code to the
number, and 4 times to add just the
area code to the number. (diagram
attached).
07:48PM 4/07
JOESMITH
9876543210
24
JOE SMITH
123 4567
JOE SMITH
1123 4567