User's Manual

information is shown.
2.If the returned call isn't answered
within 20 seconds, the phone
automatically goes on hook.
Conference
It is possible to establish a
conference between two handsets
and the external line.
Only the first handset connected to
the outside line is allowed to dial.
If the 0-9 keys are pressed on the
second handset, they will be
blocked by the base station.
Conference Establishment
1.If the handset is connected to an
external line and an talk key is
pressed on another handset, a
conference call is immediately
established.
2.Only the first handset connected
to the external line is allowed to
dial. If 0-9 keys are pressed on the
second handset, they will be
blocked by the base station.
3.If a handset has an active
connection (internal or external)
and another connection on hold, it
is possible to establish a
conference by pressing and holding
the INT key and then select menu
number 0-9,*.
4.The conference is stopped if the
TALK key is pressed on either
handset.
5.The connection will continue
between the remaining handset and
the external party.
Call Waiting
Call waiting on intercom
1.If the handsets are engaged in an
internal connection and an external
incoming call arrives, the users are
notified by a beep in the earpiece.
The identity of the caller is
displayed in the same way as a
normal external call. The waiting
call can be answered by pressing
the TALK key on either handset.
The internal connection is
disconnected automatically. If the
waiting call is not answered, the
display presentation will return
back to normal ongoing call
presentation after 15 seconds.
2.It is possible to disconnect the
internal connection without
answering the waiting call pressing
the INT key.
FLASH
You can use your cordless
telephone with special services
such as call waiting or three way
calling(Special subscription from
your local telephone company is
required). During a telephone
conversation you may hear a tone
or click, which indicates that you
are receiving another call. To speak
to the second caller and put the first
call on HOLD, press the FLASH
button. Press FLASH again to
return to original call. You may
also press the FLASH key to obtain
a new dial tone.
TELEPHONE OPERATION
21