User's Manual

auto answer is activated with the
display text "ON".
5.Press PROG, to confirm the
setting.
Key Click
When the key click option is
enabled any key press generates a
key click sound in the buzzer,
except when the keypad is locked.
The key click option is configured
by the following key sequence.
1.Press PROG
2.Press the DOWN key six times.
3.Press PROG, to enter the key
click sub-menu.
4.Enable key click by pressing 1 or
UP, or disable key click by pressing
the 0 or DOWN key.
5.Press PROG, to confirm the
setting.
Key lock
Locking the keypad
It is possible to lock the handset
keypad. The key lock function is
set/reset in the following manner.
1.Press PROG.
2.Press the DOWN key seven times.
3.Press PROG, to enter the key
lock sub-menu.
4.Enable key lock by pressing 1 or
UP, or disable key lock by pressing
the 0 or DOWN key.
5.Press PROG, to confirm the
setting. If ON was selected, the
phone locks the keypad and returns
to idle. A "key locked" status is
shown in the display while in the
standby mode.
HANDSET MENU AND PROGRAMMING
Unlocking the keypad
1.To unlock the keypad press the
key sequence '1','5','9'.Pressing
any key will display a help message
to unlock the keypad.
2.It is still possible to dial an
emergency call when the keypad is
locked by pressing TALK first and
then the emergency number
(000,110,112,119,911,999). Only
post-dial is possible in this case.
Key lock is disabled after an
emergency call.
16