Product Info

Operatiom
call should be performed to all
handsets ('*'-call) Then pressing
TALK, ENTER key.
6.Example where Name isn't
assigned on the receiving handset.
The call is performed and the
conversation counter starts
counting The handset numbers can
also be accessed directly by
pressing the INT key followed by
'1'-'4'
or '*' key.
7.The call is terminated by
pressing:
TALK Or placing the handset in the
charger After terminating an
internal call, the display looks the
same as in 5.1.3.2.3.
Call Toggling
Call Toggling - Basestation
If the base is engaged in an external
connection, it is possible to put the
external call on hold and establish
an internal call by pressing the
INTERCOM key.
Call Toggling - Handset
If a portable is engaged in an
external connection, it is possible
to put the external call on hold and
establish an internal call .
1.Pressing INT key puts call on
hold and shows new internal
selection.
2.Use up/down keys to scroll
through list of registered handsets.
3.Selecting internal #1 by pressing
TALK, ENTER or '1'.
4.The 'H' in the right hand side of
the second line indicates having the
external call on hold.
5.It is possible to toggle between
an internal call and external call by
pressing the INT key. The 'H' is
displayed also, when the internal
call is put on hold.
Call Transfer/Forward
Call Transfer/Forward -
Basestation
An incoming call can be
transferred or forwarded to a
handset during an ongoing call.
The difference is that, when the
call is transferred, the first handset
waits for the other to answer before
closing its connection, but when
the call is forwarded, the first
handset closes its connection
immediately.
The call is transferred by
pressing the.
1. INTERCOM key (the external
call is put on hold)
2. Select local handset number in
menu '1'-'4', '*'
3. Wait for the handset to answer,
then pressing SPK. PHONE to
transfer.
The call is forwarded by pressing
the.
1. INTERCOM key (external call is
put on hold).
2. Select local handset number in
menu '1'-'4', '*'.
CALL MANAGEMENT
17