Product Info

AUTO REGISTRATION
When the handset is placed in the
base station, the handset transmits
a registration packet to the base
station via the charger terminals.
The base station enables
registration and broadcasts
registration data via the air
interface. Handset locks to this
base station and registration is
complete.
When a new handset transmits a
registration packet to a base station,
the base station checks how many
handsets have been already
registered. In case 4 handsets are
already registered, the
base station starts to search the
handsets. If it can locate all, then
the 5th handset can't be registered,
and the registration is blocked. In
case a handset that already is
registered is out of range, or for
other reasons does not reply to the
search and notification request, it
will be de-registered and the
registration procedure for the new
handset is initiated.
The handset registration procedure
must be completed within the time-
out limit of 45 seconds.
The second handset cannot be
registered during an ongoing
registration procedure.
In case of heavy air interference,
e.g. when many 2.4GHz products
are active in the same area,
registration duration may be longer
since registration consists of data
transfer, that in contrast to audio,
has to be error free.
The way to de-register a handset
and register it to another base
station is to switch off the base
station and place the handset in
another base station. After
switching off the base station, the
handset is no more locked to this
base station and can be registered
to another base. When the handset
is placed in the other base station, a
new registration will take place and
the old registration doesn't exist
any more. Notice; de-registration
is not a normal user operation.
13