Product Info

Handset Battery Charging:
The battery pack in the handset must be fully charged for about 10-14
hours before using the telephone. After connecting to AC power, leave
the handset unused in the cradle for ten to fourteen hours. Later, it will
take less time for the battery to recharge. The CHARGE LED on the
base will be lit and the handset will display "CHARGING" when the
handset is in the cradle. When you remove the
To Replace Batteries:
1. Remove battery cover.
2. Remove old battery.
3. Plug the cord of the battery pack into the
handset and place the battery in the case.
4. Slide battery cover until it clicks in place.
Charge 10-14 hours before first use.
To maximize your battery's life, we recommend that you periodically
fully discharge the battery, and then recharge it. To do this, unplug your
phone line cord from the wall phone jack. Press the TALK button, and
allow the handset to remain on for 10 to 12 hours. Reconnect the phone
cord to the wall phone jack. Return the handset to the base and allow it
to fully charge for 12 hours. If this process is completed monthly, it will
reduce the memory buildup that occurs from frequent partial charging.
NOTE: a. When the battery gets low, the Battery Low ln
dicator will turn on. b. If the battery becomes low while you
are on a call, you will be disconnected after about 30
seconds. Terminate the call quickly, and put the handset in
the base to recharge the battery. c. The battery will hold its
charge for several days out of the cradle, depending on
use. NOTE: The handset will not ring when the ringer is in
the "OFF" position. If the handset is out of the cradle, it will
display"RING" during an incoming call.
INSTALLATION
12