Service support: support@giandel.com.
1. Use of advanced microprocessor control 2. Intelligent temperature control cooling fan will not work if case temperature is low. 3. With USB outlet, which can supply power for the portable device with USB port. Item PS-600JAR Continuous power 600W Surge power 1200W Input voltage range 9.
5). Short circuit protection: The AC output will be automatically shut down when short circuit. It reset on after the problem solved. 6). Thermal protection: The unit will be calorific during operation. If the temperature is higher than 65°C, the inverter will automatically shut down. Then the buzzer sound continuously and the green light is off, red light is on. Please turn off the inverter, and continue using it after the inverter cool down to normal temperature naturally.
8. About Soft start Technology. The Gradual voltage ramp-up during inverter startup. This can eliminates all shutdowns from high startup currents, which can make startup easier from large inductive loads. Suggest you switching on the large inductive loads such as electric tools and the capacitive loads firstly and a while later switching on the inverter. The soft start works. Normal working indicator Power switch (Switch) Fault indicator Remote interface Connecting wire 9.
fuse or result the permanence damage of the internal elements of inverter. 7) Take away the metal accouterment, such as ring or watch, when installation to avoid the short circuit. 8) Although there is over-voltage protection, it may also cause damage of the inverter if the input voltage is too high. 3) Assemble the remote control box 3) Connection of the AC appliance Put the power plug of the AC appliance load into the output AC receptacle of the inverter directly.
2. How to use USB outlet The USB outlet can provide stable 5V DC voltage; the maximum current is 1000mA(2100mA), which can directly provide power for the portable device with USB port. Notice: Before use the USB power supply, please make sure the device can be charged by USB and the maximum working current is no more than 1000mA(2100mA). 6. CONNECTION 1) Grounding The power inverter has a terminal on the back panel marked "Grounding" or " ".
