Installation Guide

2
TRADITIONAL DECK MOUNT TUB FAUCET
Notes:
1. Please ensure all local plumbing and building codes are observed when installing
these faucets.
2. Water supply lines must be roughed in on 8” centers.
T-FB1
Union Nut
Washer (10)
T-DLBO
Step 2
Attach T-DLBO deck elbows to union nuts on
back of faucet body using one #10 rubber gasket
on each elbow.
Step 1
Screw #11 handle hub onto hot/cold cartridges
#9 and #17. Disassemble handle and install
onto cartridge by securing with screw included.
Reassemble handle.
Step 3
Insert faucet through holes in tub rim with #20
seal washer above the deck and secure with #21
locknut. NOTE: If your tub does not have faucet
holes use a 1” hole saw and drill holes in deck
centered across the overflow hole on 8” centers.
17
11
9
T-HLVR
11
White Porcelain
11
T-HPLV
T-HCRS
T-FB1
Union Nut
T-DLBO
Rubber Seal
Washer (20)
Lock Nut (21)