Dimensions Guide

•
•
Replacement parts available
Warranty
Limited lifetime function and finish warranty to the original consumer purchaser covering defects in material and workmanship.
5 Year limited warranty for all industrial and commercial applications. See complete warranty statement for details
Technical Information
Installation Notes
2 of 2
1-888-560-5222
www.giagni.com
548 South Columbus Avenue
Mount Vernon, New York 10550
4”
6.14”
T
P
N
41
-
2/1
•
•
Flow rate of handshower:
2.5 GPM max
Toll-free helpline: 888-560-5222
Flow Rate of tub filler:
6.1 GPM @ 45 psi
6.9 GPM @ 60 psi
11.5”
8”
4.5”
2.6”
1.1”
Handle Styles
Cross Handle
Porcelain Handle
4.5”
Finished Wall
1.25”
59” Handshower Hose Length
•
10.5”
•
Mounting location depends on tub design and
location. Be sure to identify tub height when
determining location
All measurements are approximations and should be used for reference only. Giagni reserves the right to make specification and pricing changes
without notice or obligation, and to change or discontinue models and finishes. All rights reserved. Giagni 2008
©
2.5”
Refer to Figure 1 below for roughing-in detail
•
Figure 1
Components:
T-FB1-xx (Faucet Body)
T-WLBO-xx (Wall Elbows)
Traditional Wall Mount Tub Filler
Model: TWTF-xx
There must be a minimum of 2” gap between top
of tub rim and bottom of the faucet spout to comply
with plumbing codes
•
Finished Wall
Rough-in
flush to
finished
wall
Decorative
Flange
Pipe Nipple