Installation Guide

5
TRADITIONAL FLOOR MOUNT TUB FAUCET
Notes:
1. Faucet is not for use on concrete floors.
2. Please ensure all local plumbing codes are observed during installation
3. Water supply lines must be roughed in on 8” centers.
T-FB1
Union Nut
Washer (10)
U-FRSR
Step 2
Attach hot and cold risers U-FRSR to union nuts
on back of faucet body using one #10 rubber
gasket on each riser.
Step 1
Screw #11 handle hub onto hot/cold cartridges
#9 and #17. Disassemble handle and install
onto cartridge by securing with screw included.
Reassemble handle.
Step 3
Attach #1 hand shower holder with
#2 rubber gasket to outlet above
diverter handle.
NSF /ANSI 61
17
11
9
T-HLVR
11
White Porcelain
11
T-HPLV
T-HCRS
1
2